Categories
(Modulate This) AudioCubes Free Music Friday Launchpad Performance Videos Videos

Two Live Electronic Music Performance Videos for Free Music Friday – “Alone” and “Celebration and Voices”

Here are two videos for you for Free Music Friday.

Watch embedded video of “Alone” by Mark Mosher

This video has an HD version as well so check it out from your home theater using your Tivo or or other streaming box.

In this video I'm playing my original instrumental electronic music song "Alone" from my album REBOOT (http://markmosher.bandcamp.com/album/reboot name your price, enter $0 for FREE). I'm about half way through arranging and programming the synthesizers and controllers so I can add this song to my live set. I'm pretty excited about the progress I'm making on the performance so I thought I'd share a rehearsal video.

It's such an organic and textural piece, I decided to play the entire song from Percussa AudioCubes using only spatial control via hand movement. Ableton Live is playing back the pulsing drone, but almost all other elements are being played live via the AudioCubes. The AudioCubes are in "sensor" mode so placing my hand in front of a cube face plays a note on a virtual synthesizer hosted out of Ableton Live – almost like a Laser harp.

I only use the Novation Launchpad on my right to change which tracks are armed thereby allowing me to switch which synths I'm playing on-the-fly throughout the song.  At the 2:00 minute mark I start playing chords by using multiple faces simultaneously.

Watch embedded video for “Celebration and Voices”.

In this video, I'm rehearsing an original composition "Celebration and Voices" from my album I Hear Your Signals (http://markmosher.bandcamp.com/album/i-hear-your-signals name your price, enter $0 for FREE).

I'm using a Novation Launchpad and Ableton Live 8 to control the session, effects, and I’m playing melodies in real-time from the Launchpad. I'm using standard Live 8 features to communicate with the Launchpad. No additional middleware such as Max for Live is being used. I'm using additional MIDI tracks to route MIDI back out to the Launchpad to get visual feedback on sequences and to give me feedback on the notes I'm playing.

I'm in User Mode 1 the whole time and controlling all elements via MIDI notes. The entire song is performed in Session view and all elements are either being played or generated live using multiple VSTs on the fly (no audio clips). Lots of Live effects plus SugarBytes Artillery II.

Like with all songs on this album, I composed and arranged the song around the controller as opposed to composing the song then trying to figure out how to play it live.

Composer Notes
Even though these songs are from two different albums, the are related in that they tell the same story from two points of view.

Enjoy,

Mark Mosher, Electronic Musician, Boulder, CO
www.MarkMosherMusic.com
www.ModulateThis.com

Categories
Ableton Live Artist News AudioCubes Contollerism

Percussa AudioCube Production and Performance Notes for “I Hear Your Signals”

<a href="http://www.markmoshermusic.com&quot; markmosher_rehearsing_01 

For my original music album “I Hear Your Signals” (download the album free) I use Percussa Audiocubes as performance controllers. In this post I’ll give you all the geeky details about how the controllers were applied in the project.

AUDIOCUBES AND MIDIBRIDGE
I used 4 AudioCubes plus Percussa’s free MIDIbridge app on Windows to configure and route AudioCube signals to Ableton Live. I use the same MIDIbridge patch for every song which allows for consistent and predictable data mapping from the cubes to Ableton Live.

In general, I play a lot of the notes on you hear on the album via keyboards, Theremin and Tenori-On live. I tend to use the cubes as controllers, for scene launching, and for real-time modulation of effects and synth parameters and only use them for triggering notes from time to time.

CUBE CONFIGURATION
The AudioCubes are configured with the in the following modes:

  • Cube 1 – Sensor (the red cube at 9:00 in the picture above): This cube sends MIDI CC information back to Live. I configure each side of  cube to give me visual feedback where each cube face is set to a different color. The closer my finger or hand is to the sensor, the brighter the light. Currently, Sensor cubes need to be wired via USB.
  • Cubes 2 & 3 Receivers (white cubes in above picture): Sends MIDI notes back to Live when a signal is received from Cube 4. image I also send RGB MIDI light sequence via MIDI clips in Ableton. The cubes then become light show elements and also offer visual feedback. These cubes are also plugged in via USB so they can receive high-speed transmissions via MIDI clips.
  • Cube 4 – Transmitter (green in the picture above): This cube is wireless. Aligning the faces of this cub with the faces on cubes 2 & 3 triggers MIDI notes back to Ableton Live.

MIDIBRIDGE AND ABLETON CONFIGURATION
I then MIDI map MIDI CC data and Note information coming from cubes via Ableton Live MIDI Map mode to various functions within live.
For cube 1, CC’s are mapped to device parameters and macros. These in-turn are often routed to parameters within VSTs. For example, a cube face might modulate delay time with Ableton’s native Ping Pong Delay FX device. Or the CC might map to filter on a VST synth. Below is a snapshot of the MIDIBridge settings for Cube 1 (click to enlarge).

markmosher_audio_cube_config_cube1

For Cubes 2 & 3, notes are triggered when the face from the transmitter Cube 4 is detected. I route notes to either MIDI tracks holding Ableton instruments or VSTs and/or racks. In some cases I route MIDI notes through a dummy track back to SugarBytes Artillery II running in a send or on the master track for effects. Since effects are triggered via notes rather than CCs with Artillery II, this method allows me to control effects as well as playing notes with signals from Transmitter cubes which only send MIDI note information. In other words, by combining native Ableton effects with Artillery II, I can use any cube in the network to trigger effects.

CUBE USAGE FOR EACH SONG

1) “Arrival”

In this song I’m using AudioCubes as lighting and feedback elements in the live show. They were not used in composition or performance of the music. MIDI clips in Live are used to sequence the lights.